What Most Homes Have
Off-the-shelf consumer routers and mesh systems that prioritize convenience over performance. Fine for a phone and a laptop — not for a connected home.
Your automation, security cameras, audio, and lighting all depend on one thing: a network that never drops. We design and install enterprise-grade home networks across the South Sound — structured wiring, professional access points, and intelligent routing built for every connected device.
Every device — Control4, Ajax, cameras, streaming, phones — on a managed, prioritized, enterprise-grade network. Real-time traffic management so every system always has what it needs.
Consumer mesh systems create dead zones in any home with thick walls, multiple floors, or a garage. Wired access points — run from Ethernet back to your rack — deliver full signal everywhere with zero degradation.
A $150 router from a big-box store was never built to handle 40+ connected devices, 4K streams, security cameras, and a Control4 automation system simultaneously. Your network is the one system every other system depends on — and it's usually the weakest link.
Off-the-shelf consumer routers and mesh systems that prioritize convenience over performance. Fine for a phone and a laptop — not for a connected home.
Enterprise-grade networks designed as part of your home's architecture — not bolted on after everything else is installed. Wired backbone, professional access points, intelligent routing, and centralized control.
From a single-room WiFi fix to full structured wiring for new construction. We design networks that handle everything your household runs — today and for years to come.
Site survey, RF planning, and professional access point placement to eliminate every dead zone — across all floors, outdoor spaces, and outbuildings.
Enterprise-grade routing with built-in firewall, intrusion protection, automatic traffic prioritization, and a centralized management dashboard accessible from your phone.
Ethernet-backhaul access points from Alta Labs, Ruckus, and Ubiquiti UniFi — no wireless hops, no speed degradation. We match the right hardware to your project.
Cat6A and fiber optic cabling run through walls, ceilings, and attics. Future-proof infrastructure for today's demands and tomorrow's innovations.
Clean, organized rack installs with PoE switches, patch panels, UPS backup, and proper cable management. Built for long-term reliability and easy service.
Every component is selected for reliability, performance, and long-term support. No commodity hardware.
Enterprise routing, firewall, and centralized management. USA designed and assembled. Integrates with Control4 and Ajax.
Wi-Fi 6 access points and PoE switches. Multi-Pass technology for intelligent traffic management and channel optimization.
BeamFlex+ adaptive antenna technology. Dynamically steers signal to each device for optimal reception in challenging environments.
Cat6A and fiber optic. Run through walls with proper termination. Future-proof to 10Gbps+ for decades.
We don't install your network in isolation. It's engineered alongside your automation, security, and AV — so every system has the bandwidth and reliability it needs from day one.
Control4 keypads, Ajax LightSwitch, and centralized lighting panels all depend on a responsive, low-latency network to execute scenes instantly.
Explore Smart Lighting →Ajax cameras, motion detectors, and alarm events need guaranteed bandwidth and uninterrupted connectivity — especially when it matters most.
Explore Security →PowerShades with PoE draw power directly from the same network switches we install — one infrastructure powering both connectivity and shade control.
Explore Motorized Shades →Smart homes run dozens of connected devices simultaneously — Control4 processors, security cameras, smart lighting, streaming, voice assistants, and more. Consumer routers aren't built for this. Professional networks use wired access points, enterprise-grade routers like the Island Router, and structured cabling to deliver consistent, lag-free performance everywhere in your home.
The Island Router by PerfTech is an enterprise-grade home router designed specifically for smart homes. It features a built-in firewall with intrusion protection, automatic traffic prioritization so critical devices always have bandwidth, centralized network management from your phone, and seamless integration with Control4 and Ajax Systems. Designed, assembled, and supported in the USA. Read our full Island Router overview →
Mesh systems communicate wirelessly between nodes — every hop degrades speed and increases latency. Wired access points connect via Ethernet cable directly to your router, delivering the fastest, most reliable connection with zero signal loss between nodes. For smart homes with automation, security cameras, and streaming, wired APs are the professional standard. Read our full comparison →
Yes. We can often run Ethernet to access point locations through attics, crawl spaces, and existing conduit without opening walls. For new construction and remodels, we install structured wiring before drywall goes up for the cleanest result.
It depends on your home's size, construction, and how many devices you need to support. A single access point addition is much less than a full structured wiring project. We offer free network assessments and our online estimator gives you a ballpark instantly.
We serve Kent, Tacoma, Gig Harbor, Federal Way, Auburn, Puyallup, Sumner, Bonney Lake, Covington, Maple Valley, University Place, Tehaleh, and the greater South Sound region of Washington State.
Professional network design and installation for homes and businesses across the South Sound.
We don't install networking in a vacuum. Your WiFi is engineered alongside your automation, security, and AV — so every system has the foundation it needs from day one. Schedule a free assessment.
The world's biggest soccer tournament kicks off right here in Seattle. Multi-display AV, zone audio, and one-tap scene control — installed before kickoff for venues and homes across the South Sound.