The South Sound's security-first integrator
Smart home installation
in Sumner, WA
Ajax security, Control4 automation, wired Wi-Fi, theater and motorized shades for Sumner homes, from established streets in Old Town to new construction on the corridor toward Bonney Lake. Designed and installed by our own team from Kent, under 30 minutes by SR-167 and SR-410.
Rivas Technology Group installs smart homes in Sumner, WA: Ajax security first, then Control4 automation, wired Wi-Fi, theater, audio and motorized shades. Old Town homes get wireless retrofits; the East Sumner corridor toward Bonney Lake gets pre-wire at framing. Based in Kent, under 30 minutes away.
- Drive time
- Under 30 minutes from 415 Railroad Ave S, Kent via SR-167 and SR-410
- Housing
- Old Town and downtown retrofits; East Sumner and Bonney Lake corridor new builds
- License
- WA electrical contractor RIVASGL799DR, bonded and insured
- Dealers
- Control4 Authorized Dealer; Ajax Systems dealer
What goes in first in a Sumner home?
Security, and in Old Town that usually means retiring an alarm panel from the 1990s. The replacement is an Ajax hub, door and window sensors on the frames, a keypad by the door and cameras over the driveway. MotionCam detectors deliver the first photo within 9 seconds1. Not one of those parts needs a new wire in an established house. Control4 listens to the alarm state and acts on it.
Becklar, a UL-listed central station, monitors it month to month, and the hardware belongs to you from the start. How the security side is designed is on the home security page.
Where in Sumner do we install?
Old Town, downtown, East Sumner and the corridor toward Bonney Lake. Our office at 415 Railroad Ave S in Kent is under 30 minutes away by SR-167 and SR-410. Many houses in Old Town and around downtown date from the early 1900s through the 1970s, so the design there is wireless-first. Ajax on the frames, Control4 dimmers in the switch boxes already there, rechargeable shade motors, no drywall repair.
East Sumner and the SR-410 corridor toward Bonney Lake are active new construction. There we pre-wire at framing and program before move-in. The same crews work Tehaleh and Lake Tapps, so we are on that road most weeks. Sumner's Sounder station draws commuters who want the house to run itself while they are gone, and scenes plus a monitored alarm are what make that happen.
What does Control4 add to a Sumner home?
A "Leaving" scene that arms Ajax, locks the door and shuts the lights off before the 6:40 train, and a "Home" scene that reverses it from the platform. Behind those scenes are one app, one remote and engraved wall keypads that run lights, shades, audio, TV, climate, locks and the alarm. More than 500,000 homes run Control4, and it works with 25,000+ third-party products2. Rivas Technology Group sells and programs it as a Control4 Authorized Dealer, listed on Control4's integrator map. Voice through Josh.ai is processed inside the house. The Control4 page covers cost drivers and the Ajax integration.
Why does the network come first in Sumner?
Because an Old Town two-story with a detached garage is exactly where a mesh kit drops. Every camera, keypad, speaker and shade depends on the network, so it gets designed first. The fix is a wired access point on each floor and one in the garage, fed by Cat6A, behind the Island Router, a wired, subscription-free router3. We size the Wi-Fi by device count and use Ruckus or Alta Labs access points. Detail is on Wi-Fi and networking.
Theater, audio and shades
Corridor new builds get speaker cable to every room and the patio while the framing is open. Old Town homes get in-ceiling speakers with one cable run and rechargeable shade motors on the west windows. Either way the result is a media room that starts with one button, music zones inside and out, and shades that share a schedule with the lights. Read more on outdoor living, home theater and audio, smart lighting and motorized shades.
What drives the cost in Sumner?
Whether the walls are open. Pre-wire on the corridor lets us pull cable once; Old Town retrofits stay lean because the platforms are wireless. Beyond that, the number moves with the room count, the systems you choose and the equipment you already own. After a walk-through a single system gets one fixed price; a whole-home Control4 project is priced room by room so it can be phased. This page carries no package prices. The smart home installation cost page shows what moves the number, and the instant quote produces one.
Where we work
From Sumner the SR-410 corridor continues to Bonney Lake and Tehaleh, where the same crews work. Elsewhere in Pierce County: Puyallup, Tacoma, University Place and Gig Harbor. North of the county line, the south King County cities: Kent, where the office is, Auburn, Covington and Maple Valley, Renton, Tukwila and Federal Way. The Olympic Peninsula is by appointment, and the residential hub describes the whole service.
Why Rivas Technology Group
Licensed, bonded and insured as WA electrical contractor RIVASGL799DR4, Rivas Technology Group has worked from Kent since 2020. Control4 Authorized Dealer, listed on Control4's integrator map; Ajax Systems dealer, listed on ajax.systems; CEDIA member 2022 to 2026; BBB accredited, A+; 5.0 from 49 Google reviews. Our own team installs in homes and stays on afterward through the optional CURATOR remote care plan. The about us page has the story; contact us or the form below books a walk-through.
Questions we hear
Can you replace an old alarm in a Sumner house without new wiring?
Yes. Ajax detectors are wireless on the encrypted Jeweller radio, so the hub, sensors and keypad go in without cable. Old Town homes are where we replace legacy alarm panels most often. Monitoring is month to month.
Do you pre-wire the new construction toward Bonney Lake?
Yes. We coordinate with the builder at framing for Cat6A, speaker cable and conduit, verify every run before drywall, and return at trim to install and program. See the builder partner page.
How far is Sumner from your office?
Under 30 minutes from 415 Railroad Ave S in Kent by SR-167 and SR-410. We are on that road for Bonney Lake and Tehaleh work as well, so Sumner site visits and service calls are usually within the week.
Can you retrofit a downtown Sumner house without opening walls?
Yes. Control4 dimmers replace the switches you have, shade motors are rechargeable, and access points and cameras get one planned cable run each. Most Old Town projects need no drywall repair.
How much does smart home installation cost in Sumner?
It depends on rooms, systems, wall access and what you already own. A single system is a fixed price after a walk-through; whole-home Control4 is quoted room by room so you can phase it. The instant quote gives you a starting number.
Does the alarm work if the internet drops?
Yes. The Ajax Hub 2 Plus keeps Ethernet, Wi-Fi and two cellular SIMs live at once, so a dead router does not silence it. Monitoring through Becklar, a UL-listed central station is month to month.
Start with a walk-through in Sumner.
Tell us the neighborhood, or the lot and the builder if you are still framing. We come down from Kent, look at it with you, and send a fixed proposal. We call or text back within one business day.